Cr-10 Frame Brace

EDIT: added a version that uses M5x10mm bolts.

This is a Cr-10 frame brace that I designed. I wanted a truss-style brace for the printer, that would help prevent ghosting, and look good. This can be used with the ever popular braces by RebelRousingProps ( https://www.thingiverse.com/thing:2123233), or on its own.

There are two stl's. The only difference is that one of them is filleted. To my knowledge there are no differences in stiffness, so it is only a small style difference.

PRINTING:
Print the brace on its side. There should not be any problems, as the steepest angle is a 45. There is a small amount of bridging that must be done, but I didn't have any problems with it.
I used PLA as it is very stiff.

HARDWARE:
All you need are four m4 x 10mm bolts and likewise T nuts.

Happy printing!