Crow

 The Model is 200x200mm in size. You can adjust the X and Y but Z must remain the same.  You may print at higher layer heights below the Min Depth of 0.48mm  Actual Depth is 2.1mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 2.5 PLA BambuLab Basic Gray Transmission Distance: 3 PLA BambuLab Basic White Transmission Distance: 6 This print uses 4 unique filaments. Substitue to your own needs. Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue Gray At layer #16 (1.36mm) swap to Gray At layer #20 (1.68mm) swap to White for the rest.