Crown

🧩 DescriptionAn intricately modeled decorative crown designed to evoke regality and elegance — perfect for royal-themed statues, displays, cosplay props, or tabletop scenes (scale as needed).The model includes a central M8 screw socket on the bottom interior so you can securely mount the crown to a stand, statue, or headband.🎯 PurposeIdeal for display pieces, photo props, or role-playing/cosplay after scaling. For wearable use, scale to head circumference and test-fit with a low-quality draft before final print.🖨️ Printing Orientation & TipsOrientation: Print base-down (upright) for best detail fidelity and tip sharpness.Supports: Use internal supports only (block supports on the outside surfaces; allow supports inside the cavity to preserve exterior finish). Tree/organic supports work well.Brim: Add a brim if you see any warping or if contact area is small.Detail filaments: Gold/metallic PLA or silk filaments enhance the regal look. For painting, use neutral PLA and finish with metallic spray or rub-on wax.Scaling: For props, start at 100%; for miniatures, 50–70%; for full cosplay, 105–115% depending on padding and hairstyle.Test the M8 socket fit at draft scale if you plan to mount the crown with a screw or stud.🛠️ Recommended SettingsLayer height: 0.12–0.16 mm (fine detail); 0.20 mm is acceptable for faster printsWalls / perimeters: 3 (use 4 if you want stiffer tips)Infill: 10–15% (Gyroid or Grid) — mostly decorative; increase if you need a heavier feelSupports: Internal only (enforcers inside / blockers outside)Brim: Optional (use if needed for adhesion or tall, slender variants)Filament: PLA (indoor display, best surface) or PETG/ASA (added toughness/UV resistance for events/outdoors)Adhesion: PEI smooth or textured sheet with glue stick or another adhesion aid recommended🔧 Assembly / MountingNo assembly required — single-piece print.Mounting point: M8 screw socket centered on the bottom interior; use an M8 screw/stud or insert for firm attachment to a stan