Crown

Custom Crown — Irregular Ornaments (Front Large, Back Small)🧩 Design Concept & PurposeA decorative crown with an irregular ornament layout — large motifs in front, smaller in back. Perfect for statues, cosplay props, photo shoots, or display pieces (scale as needed).This is a modified variant of my earlier crown project (with a different symmetry and detailing). You can also check the original here: https://www.crealitycloud.com/model-detail/crown-3d-print?source=22📸 PhotosThe real photos show PETG prints before painting.🖨️ Printing SuggestionsIf you don’t plan to paint after printing:Use a fine resolution to capture detail (e.g., 0.08 mm).Consider metal-infused filament for an authentic metallic look.Add supports only in critical areas (crossed/inner arches) if your printer needs it.If you plan to print → refine → paint (RECOMMENDED .3mf profile attached):Layer height: 0.20 mmWalls / perimeters: 5Infill: 20% GyroidMaterial: PETG (chosen here for durability; PLA also works if it suits your use)Brim: Yes (stability for tips/arches)Supports: Inner support only where neededAdhesion: PEI smooth or textured sheet with glue stick or another adhesion aid recommendedThe attached .3mf includes a print setup intended for post-processing and painting.🧰 Assembly & MountingNo assembly required — prints as a single piece.An M8 threaded socket is integrated at the underside center:Handy to fix the crown to a figurine/stand.Useful as a handle during priming and painting (attach a stud/bolt or rod).🎨 Finishing TipsLight sand → filler/primer → sand fine → metallic spray (gold/silver) or pearl/ice blue.Add acrylic washes into recesses for depth; seal with satin or matte clear.Optional: stick-on gems or vinyl accents for a royal touch.☕ Support & FollowIf you like my designs, follow me — more functional everyday prints are coming soon, including tool organizers, workshop helpers, and printable accessories.You can buy me a coffee simply by printing and boosting my files — no