Cryptex Dice Vault

This cryptex tube should hold a set of seven D&D dice nicely. The inner tube is 28mm in diameter and has an overall inside length of 182mm. If your dice are a little bigger, you can always scale it up a little. As designed, it will just fit on a Prusa Mini (180x180x180mm).The cryptex has seven dials with faces marked 1 through 8 (count the vertices). I've provided eight different dials, each with the unlocking slot aligned to a different face. Stack up the dials in any order to create your custom 7-digit combination.PrintingPrint in PLA with 0.2mm layers. Use 3 perimeters and 20% infill. None of the parts require additional supports, but note that the Outer piece has a built-in break-away support for the upper lip overhang. (My Prusa Mini printed the overhanging lip fine without the support, if you want to try eliminating it in your slicer.)Print one Inner piece and one Outer piece. Before printing the dials, pick your 7 digit combination and then make sure you print one dial that corr