Thingiverse
Customizable ROK Block
von Rokenbok
47
Downloads
25
Likes
0
Makes
A customizable file to create ROK blocks with variable length, width, and height.
The Customizer app may not be fully working. You can download the OpenSCAD file and edit the variables directly in OpenSCAD (available for free here: http://www.openscad.org). You can also download pre-made STL files for printing.
The optional supports are designed for single extruder printers for minimal, easy to remove (with needle-nose pliers) supports. Be careful when removing the supports (wear safety glasses!), PLA shards can be sharp.
Tested with the following setup:
*Printer: Replicator 2 (PLA)
*Layer height: 0.2mm
These designs are owned by Rokenbok Education (http://www.rokenbok.com) and published under license by kid*spark (http://www.kid-spark.org), a nonprofit corporation, for nonprofit and educational uses. Drawings of these designs are licensed under Creative Commons Attribution-NonCommercial-ShareAlike (BY-NC-SA) 3.0: http://creativecommons.org/licenses/by-nc-sa/3.0/ The
The Customizer app may not be fully working. You can download the OpenSCAD file and edit the variables directly in OpenSCAD (available for free here: http://www.openscad.org). You can also download pre-made STL files for printing.
The optional supports are designed for single extruder printers for minimal, easy to remove (with needle-nose pliers) supports. Be careful when removing the supports (wear safety glasses!), PLA shards can be sharp.
Tested with the following setup:
*Printer: Replicator 2 (PLA)
*Layer height: 0.2mm
These designs are owned by Rokenbok Education (http://www.rokenbok.com) and published under license by kid*spark (http://www.kid-spark.org), a nonprofit corporation, for nonprofit and educational uses. Drawings of these designs are licensed under Creative Commons Attribution-NonCommercial-ShareAlike (BY-NC-SA) 3.0: http://creativecommons.org/licenses/by-nc-sa/3.0/ The
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
