MakerWorld
Garden
Zum Modell
customizable trellis for rectangular posts/columns
4
Downloads
5
Likes
3
Makes
This trellis is designed for rectangular posts. You can adjust both the length and the width, where the width corresponds to the side with the grid. It is recommended to allow a tolerance of 0.2–1 mm for the best fit. To prevent the trellis from sliding off the post, two small wedges are included; these can be inserted between the post and the trellis to fix it securely in place.The minimum dimensions are 65 mm in length and 40 mm in width, as smaller values may cause geometry issues. No glue is required for assembly. For outdoor use, printing with PETG or other weather-resistant filaments is recommended. The default size is designed for a 110 × 110 mm post.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
