Dancer bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 60.02x150mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 4 unique filaments Other similar coloured filaments will work well.Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #15 (1.28mm) swap to White for the rest.