Dancing Doll

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 200x200mm in size. You can change the X and Y but Z must remain the same.  You may print at higher layer heights below the Min Depth of 0.48mm  Actual Depth is 4.6mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA BambuLab Basic Pink Transmission Distance: 8 This print uses 5 unique filaments. Substitute as needed. Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Jade White At layer #13 (1.12mm) swap to Blue Gray At layer #19 (1.6mm) swap to Jade White At layer #28 (2.32mm) swap to Lilac Purple At layer #43 (3.52mm) swap to Pink At layer #50 (4.08mm) swap to Jade White for the rest.