Day Clock

This clock is built from a Walmart Mainstays 8.78" Basic Clock. Remove the clock mechanics from the back. Use the bracket to mark the holes for the clock mechanics gear and the second gear. Drill a hole for the new placement of the clock mechanics box on the back, and the second gear. Mount the bracket and push through the clock mechanics from the back. Super Glue the first gear on. Then mount the second and third gears to the bracket using 3 mm x 15 mm screws. Using hot glue, glue the clock mechanics to the back. Using the one of the black plastic circles that came with the clock to secure it to the box, screw it down to the center gear screw and the hot glue.

As to the face of the clock, I used to Inkscape to design it. You will need to design your own clock face, print it out and glue it in before adding the gears.

Lastly, the hand is one that came with the Walmart clock. Add two right angle bends to the hand so that it clears the screw on the second gear and super glue the ar