Deadpool Book Ends

SummaryUpdatedDeadpool bookend. Two choices for the base, one with a longer section under the book for added stability.Printed at 25% infill, can be printed with more or less depending on how much weight the books will have.I made an error creating the left side and had to re-create the STL.Print SettingsPrinter Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: Doesn't Matter Supports: Yes Resolution: .1 - .2 Infill: 25 Filament:3D Fillies PLA+ Black, Red, WhitePost-PrintingI printed it is 3 parts:Base - BlackTop of Book endEye - WhiteI oriented the top section so that it printed flat with no supports with the flat side down - detailed side facing up (left side will need to be flipped 180 degrees). I put a pause in at Layer 320 (when printing at .1) - the last layer before the "outside" starts to print to change the filament to red.Printed the "eye" in white. Assemble the 3 pieces and apply glue to the joints if you like.