Deadpool Hueforge

I use a stronger white for this



Depend on the white you have will give different result



Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm



You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 1.2mm and the Actual Thickness is 1.04mm


#080a0d PLA PolyLite Black Transmission Distance: 0.3
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments


Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Red
At layer #7 (0.64mm) swap to White for the rest.