Death Moth

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 150x150mm in size You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Orange Transmission Distance: 5 PLA+ Numakers Pure White Transmission Distance: 4.8 This print uses 4 unique filaments Swap Instr