Thingiverse
Dedication Class Remix
di JamesB_Yo
14
Download
23
Likes
0
Makes
Remix of Dedication Class starship
by trekkie1481
-------
Quick remix for a FB group member. Cut the file into small easier to print parts that need minimal support.
- Would recommend support touching build plate with brim for the secondary hull parts. The nacelle pylons have a bit of an overhang going on.
- Make sure (in Cura) to have the "Horizontal Expansion" setting in Shell to 0.5 to avoid the bits of the voids in the saucer I wasn't able to repair.
3/4/18 EDIT NOTE:
- Updated saucer files to fix voids and address the 0.5mm float above build plate
Description:
Got around to fixing the saucer section bits. They had some voids that caused printing issues, and were being ported into Cura 0.5mm above the print bed. That should be addressed with the new files (removed the old ones). Due to the nature of these fixes, the file size exploded, apologies for that. New saucer files are set to 900%, will update the rest of the files to match soon.
4/14/18 EDIT NOTE:
by trekkie1481
-------
Quick remix for a FB group member. Cut the file into small easier to print parts that need minimal support.
- Would recommend support touching build plate with brim for the secondary hull parts. The nacelle pylons have a bit of an overhang going on.
- Make sure (in Cura) to have the "Horizontal Expansion" setting in Shell to 0.5 to avoid the bits of the voids in the saucer I wasn't able to repair.
3/4/18 EDIT NOTE:
- Updated saucer files to fix voids and address the 0.5mm float above build plate
Description:
Got around to fixing the saucer section bits. They had some voids that caused printing issues, and were being ported into Cura 0.5mm above the print bed. That should be addressed with the new files (removed the old ones). Due to the nature of these fixes, the file size exploded, apologies for that. New saucer files are set to 900%, will update the rest of the files to match soon.
4/14/18 EDIT NOTE:
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
