Thingiverse
Delta Effector
por gaderchen
0
Descargas
1
Likes
0
Makes
About Assembly
--> All using M3 screw : )
1) Cooling fan : M3 x 20 - 4 pcs (screw hole dia need reduce a bit)
2) Upper cover and lower bracket : M3 X 20 - 4 pcs (need 4 pcs nut)
Note:
a. Please check print part size and adjust before print it.
b. Please attention the heater and extrude head not on CAD , therefore please careful the gap dimension between extrude head and lower bracket.
c. Change the delta effector the print dimension scale will be different.
--> All using M3 screw : )
1) Cooling fan : M3 x 20 - 4 pcs (screw hole dia need reduce a bit)
2) Upper cover and lower bracket : M3 X 20 - 4 pcs (need 4 pcs nut)
Note:
a. Please check print part size and adjust before print it.
b. Please attention the heater and extrude head not on CAD , therefore please careful the gap dimension between extrude head and lower bracket.
c. Change the delta effector the print dimension scale will be different.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!