ring

Silver Band: Represents purity and timeless elegance. Smooth, polished finish for comfort and durability.Gold Capsule: A protective, ornamental housing for the gemstone. Designed as a hollow or semi‑enclosed structure that cradles the gem securely.Red Gem: Symbolizes passion and vitality. The capsule highlights the gem by contrasting gold against silver.🛠 Structural FeaturesBand:Width: ~3 mm for balance between strength and comfort.Thickness: ~2.5 mm, slightly domed outer surface.Ergonomic inner curve for daily wear.Capsule Setting:Cylindrical or oval capsule mounted at the top of the band.Capsule walls ~1 mm thick, with an opening or prongs to showcase the gem.Designed to hold a round‑cut or oval red gem (5–7 mm diameter).Integration: Capsule fused seamlessly into the band to avoid weak joints.⚙️ Print Settings🖨 Printer & MaterialSilver Band Simulation:Use metallic PLA or resin for prototyping.For final production, print in castable resin → then cast in sterling silver.Gold Capsule Simulation:Print separately in gold‑colored resin/filament or cast in gold alloy.Alternatively, dual‑extrusion printers can print silver and gold filaments together.Gem: Insert manually after printing; design tolerances allow snap‑fit or adhesive bonding.📐 Print ParametersLayer Height: 0.05–0.1 mm → ensures smooth curves and fine detailing.Infill: 20–30% for strength without excess weight.Supports: Required under capsule overhangs; use easy‑removable supports at ~60° angles.Shells/Perimeters: 3–4 walls for durability.Build Orientation: Print ring flat on its side to minimize layer stress on the band.🔧 Post‑ProcessingSand and polish to remove layer lines.Electroplate or cast in silver and gold for authentic finish.Secure gem with prongs or adhesive depending on design tolerance.