Devil may cry

Please don't forget to rate my work if you print it, thank you Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 126.56x225mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 3.9 PLA Jessie Premium Neon Green Transmission Distance: 8.8 PLA Hatchbox Pink Transmission Distance: 12 PLA BambuLab Basic Jade White Transmission Distance: 4.7This print uses 5 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Red At layer #13 (1.12mm) swap to Neon Green At layer #14 (1.2mm) swap to Pink At layer #17 (1.44mm) swap to Jade White for the rest. Boost MeI hope you like the print if you do please consider a boost. It's for free and it would help me a lot. Thank you and enjoy the print