diceman

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.33x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.24mmThe Max allowed Thickness is 2mm and the Actual Thickness is 1.2mm Filaments Used:#080a0d PLA PolyLite Black Transmission Distance: 0.3#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 2 unique filaments Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to Jade White for the rest.