Thingiverse
Dick Kicker Patch
di YASTRUB24
1
Download
1
Likes
0
Makes
The model can be easily scaled to the desired size and printed in various colors according to preference.
Recommended print method: FDM/PLA (or PETG for increased strength).
Layer height: 0.16–0.2 mm for clear relief.
Infill: 15–25% (sufficient for a keychain or emblem).
Use 2–3 walls for better strength.
Print in 2 colors : base (e.g., green) + emblem (yellow). You can change the filament at the desired layer height.
Supports: not needed (model is optimized for printing without supports).
Recommended print method: FDM/PLA (or PETG for increased strength).
Layer height: 0.16–0.2 mm for clear relief.
Infill: 15–25% (sufficient for a keychain or emblem).
Use 2–3 walls for better strength.
Print in 2 colors : base (e.g., green) + emblem (yellow). You can change the filament at the desired layer height.
Supports: not needed (model is optimized for printing without supports).
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!