Diecast Remote Raceway - Controller

The Diecast Remote Raceway Controller component houses a Raspberry Pi Zero W, a Waveshare 1.3" display HAT and custom lane interface board. The Controller is responsible for all aspects of running a race. Details, the master copy of the STL files and all necessary software can be found in the ghitub repository: [https://github.com/tquiggle/Diecast-Remote-Raceway](https://github.com/tquiggle/Diecast-Remote-Raceway)

The control hardware is housed in a three piece case that is based on [JdaieLin](https://github.com/JdaieLin)'s [PiSugar Case](https://github.com/PiSugar/PiSugar). The controller consists of four 3D printed components (plus one optional temporary part):

* bottom-cover.stl - this is an optional bottom cap for use on a completed controller case
while testing, before mounting to a set of starting gate lanes. It is based on the PiSugar [pisugar_case_common_cap.STL](https://github.com/PiSugar/PiSugar/blob/master/model/pisugar_case_common_cap.STL) but has been modified