Slicer Discord
Diffuser Kit 001 – 3D printable model from MakerWorld MakerWorld
Electronics

Diffuser Kit 001

1 Downloads
4 Likes
0 Makes
Go to Model
This diffuser kit is simple to use, all it needs is water and power by USB-C, so it works with pretty much any USB-C charger or port you already have. Just plug it in and place the cotton stick in some water and it starts right up. It’s a fun little kit to experiment with, especially if you like designing your own enclosures. You can print any style you want around it—minimal, playful, futuristic, textured, whatever fits your space. There are tons of ways to make it your own. You can use it with essential oils to leave your room smelling nice or perhaps use it to make a smoke effect, whatever. You can find the link to the kit here: https://www.aliexpress.com/item/1005009352988143.html?spm=a2g0o.productlist.main.6.23fbvhkqvhkqBb&algo_pvid=2d6dd72b-7245-446c-a3b9-cf4db05dd61b&algo_exp_id=2d6dd72b-7245-446c-a3b9-cf4db05dd61b-10&pdp_ext_f=%7B%22order%22%3A%22422%22%2C%22eval%22%3A%221%22%2C%22fromPage%22%3A%22search%22%7D&pdp_npi=6%40dis%21EUR%211.75%211.75%21%21%2114.06%2114.06%21%4021038
DIY
Category
Electronics
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA, Carbon Fiber
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection