Dobby bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 50x150mm in size. You may print at higher layer heights below the Base Thickness of 0.48mm. The Max allowed Thickness is 1.68mm and the Actual Thickness is 1.68mm. Filaments Used: PLA ******** Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA ****** Basic White Transmission Distance: 7 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #12 (1.04mm) swap to White for the rest.