DPS600mount for AM8

this is to mount the DPS600 psu to the back of the right Z-tower

you need foillowing:
1 amphenol MUSBA51100 port
4 M5 screws for frame (or 6 if you use 2 holders)
4 nuts for mounting in the frame (or six)
2 screws for amphenol mount

hole is an USB port for an amphenol USB port.
on the backside there is a small gap to the frame, this is used to drag the powercables inside the frame.

keep in mind that i do not use the standard fasteners for the frame. if you do, just saw off the edge to make it fit.

will need supports.

one of each is needed, if you feel like it, add the holder twice so you have it tightly secured (i use only one holder).


will be work in progress until someone prints it and says its OK