Drawerfinity

by Pineapple Person · 3D Printer Accessories

1 Downloads

1 Likes

0 Makes

The gridfinity base plate is 5x5 and 220x220mm it takes ~6hrs to print and uses ~140g of filament. The baseplate was modeled after Mcbillsan's Snapfinity baseplate. The drawer system is 220x53x216mm it takes ~12hrs and 17mins and uses ~600g of filament. Print all parts of the drawer system upright and together.Print the baseplate with supports.Print everything using support cubic.

grid finity

Pineapple Person also publishes on

4 additional models across 1 more platforms

Printables

4 models

♥ 34 ↓ 135 ⚒ 3

Frequently Asked Questions

Which 3D printer is suitable for Drawerfinity?

Any FDM printer should handle Drawerfinity just fine. It's been printed on machines like Bambu Lab X1C, Prusa MK4, Creality K1 Max, Anycubic Kobra Max. A minimum build volume of 220 mm is recommended.

Does Drawerfinity need supports when printing?

Yes, Drawerfinity will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Drawerfinity?

According to the design notes, Drawerfinity takes approximately 6 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Drawerfinity available in?

Drawerfinity is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Drawerfinity free to download?

Yes, Drawerfinity is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Drawerfinity

Similar Models

Add to Collection