Thingiverse
DripBox
di VoidKiwi
1
Download
0
Likes
0
Makes
Do you have something that drips but not enough to bother fixing it? boy do I have the solution for you. The "drip box"™ is the perfect solution for the lazy and poor! just set it under the thing that drips and forget it.
WARNING: only use on things that drip very slowly allowing for the liquid to evaporate before the container fills.
in all seriousness I have a faucet in my upstairs bathroom that was damaged and I can't be bothered to replace it. so instead of spending money and about 20 minutes fixing it. I decided to learn to 3d model and print a suitable receptacle for dripping water.
printed in PLA at 0.16mm with 15% infill at 150% scaling on its side with the lettering facing up
**NOTE: this is a functional print. i do not care what it looks like or how well the inside looks. there was a pretty decent amount of stringing on the inside behind the lettering when i printed. if that bothers you use supports and print on its bottom.
WARNING: only use on things that drip very slowly allowing for the liquid to evaporate before the container fills.
in all seriousness I have a faucet in my upstairs bathroom that was damaged and I can't be bothered to replace it. so instead of spending money and about 20 minutes fixing it. I decided to learn to 3d model and print a suitable receptacle for dripping water.
printed in PLA at 0.16mm with 15% infill at 150% scaling on its side with the lettering facing up
**NOTE: this is a functional print. i do not care what it looks like or how well the inside looks. there was a pretty decent amount of stringing on the inside behind the lettering when i printed. if that bothers you use supports and print on its bottom.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
