Thingiverse
Hobby
Model downloaden
Drone - FireFlo v3
780
Downloads
596
Likes
20
Makes
This is a update of the "FireFlo v2" and a remix of the "DragonFli" frame (yes... with "i"!) and an alternative frame for the Blade NanoQX (also FPV).
##### Some general details:
* It consists of a topplate and a lowerdeck connected with shock absorbers to undock the flight control + cam and reduce motor vibrations.
* It has higher stiffness then the v2
* There are different options and predefined strapholders to attach the lipo (on the topdeck or under the lowerdeck)
* Antenna protection predrills
* More free space to add your own vTx and cam and enough space to place different flight controls (from NanoQx original board to SciSky).
* And because it consists of two parts, you can now mix colors *yeyyyy!!* :D
##### Some more detailed details:
* It fits the original NQX Cam or the additional Spektrum Micro Cam or selfmade cams.
* Its available for 7mm and 8.5mm Motors.
* You can bend the camera holder up to 20° if you heat it up a bit, but be careful.
* Frame size is a
##### Some general details:
* It consists of a topplate and a lowerdeck connected with shock absorbers to undock the flight control + cam and reduce motor vibrations.
* It has higher stiffness then the v2
* There are different options and predefined strapholders to attach the lipo (on the topdeck or under the lowerdeck)
* Antenna protection predrills
* More free space to add your own vTx and cam and enough space to place different flight controls (from NanoQx original board to SciSky).
* And because it consists of two parts, you can now mix colors *yeyyyy!!* :D
##### Some more detailed details:
* It fits the original NQX Cam or the additional Spektrum Micro Cam or selfmade cams.
* Its available for 7mm and 8.5mm Motors.
* You can bend the camera holder up to 20° if you heat it up a bit, but be careful.
* Frame size is a
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
