dropController Project Box

I designed this box for the dropController brand of valve control for water drop photography. It's a tight fit, so be careful fitting the board to the box. It's made to use the top and bottom standoffs that came with the kit, and the clear top cover.

I replaced the plastic screws with M3x10mm screws, but they don't need to be that long, just what I had around.

The cutout for the USB may have to be modified for your cable. I made it big enough to fit my cable end.

I used supports on the holes.

Pics shown were altered by hand with a drill, STL has changed dimensions so all holes should fit as printed.