DropOpenDewshield 1.2

Seestar S30 Fall-Away Dewshield and Masks-Stop worrying about shutting down with the dewshield installed!When I bought my Seestar S50, I had to buy this equipment ($70 online!). Now that I have a 3D printer, and a Seestar S30, I decided to make my own. This kit provides the fall away mount, and dewshield, to be used together. There are also 3 diffraction masks that fit on the end of the dewshield. Two of the masks are for picture enhancement. The third is a bahtinov mask that I made using McKraken’s Taylored Bahtinov mask. I included it so that you would not have to make one for this setup. The Bahtinov mask should be printed with a 0.2mm hotend. Seestar S30 not included!Notes: If printing the bahtinov mask, you should use a 2mm hotend. Everything else can be printed using a 4mm hotend. I used BambuLab Black Matte PLA for this project, and printed on a smooth plate so that I did not get reflections from the scope side of the plate. I used a self-adhesive black felt to line the inside o