Dry Box Basket

I used all the printed parts and steel rod length from this project:

https://www.thingiverse.com/thing:4758992/comments

but used the box from this project:

https://www.thingiverse.com/thing:2929701.

The outside rod supports are oriented to rest against the wall of the box and the inner supports rest on the bottom as shown in pictures.

Oriented this way gave enough room to add a screw on basket to hold the mini dehumidifier found here:

https://www.amazon.com/gp/product/B000H0XFCS/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

You will need:

4x M3x20 screws
4x M3 nuts
4x M3 washers


The slot on the basket is a bit of a tight fit to get the nut on the screw but nowhere near impossible.