Dynaplug extra plug case

Case for holding extra plugs for Dynaplug regular and road plugs. Models for single and double plugs. Case is pretty watertight, have tried to get water in without succeeding, threads close tight. Diameter is 10.8mm and length 19-49mm depending on model. If you are thinking which plug you have, you most likely have regulars, road plugs are much shorter and have to be bought separately. Regular: Road: Would recommend PETG, ASA etc, PLA might be little brittle for the threads, but might work if handling a bit more carefully. Print profiles are with 0.10mm layer height, no need for supports or brim.