Eagle

An Eagle with a nice backdrop in it. Frame in picture is from Canadian Gamer slim and fancy. If you like this please give me a like and follow and boosts are always appreciated. Project: eagle.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Matte Ivory White Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #13 (1.12mm) swap to Gray At layer #16 (1.36mm) swap to Ivory White for the rest.