Eagle

This is my first attempt at making my own Hueforge and uploading as well, enjoy. Project: Eagle.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100x100mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA Sunlu Black Transmission Distance: 0.1 PLA Polar Brown Transmission Distance: 1.5 PLA+ Inland Orange Transmission Distance: 5.6 PLA Sunlu Pure Yellow Transmission Distance: 5.9 PLA Sunlu White Transmission Distance: 7.5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Brown At layer #9 (0.8mm) swap to Orange At layer #13 (1.12mm) swap to Pure Yellow At layer #15 (1.28mm) swap to White for the rest.