Eagle with Flag Artwork Hueforge

Can be printed with a single AMS unit. Assign Black and White to the same AMS slot and swap the Black for the White after the Black finishes ~2 hours into the print. Enjoy and drop a like or leave more suggestions for me to Hueforge! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA PolyLite White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue At layer #13 (1.12mm) swap to Red At layer #16 (1.36mm) swap to Yellow At layer #21 (1.76mm) swap to White for the rest