Easter ARC

This is a Easter-Arc with lights. The Print needs a Build-Plate-Size about 300mm. I printed on the K1 MAX. You need no Support. The printingtime is about 16 hours.Helpful things you need to build: LED-Stripe, tape, screwdriver, tweezers, batteries0. Bring the LED-stripe through the hole in the Base-part.1. Compare the Outside_01-part with Eggtype_01 or 022. Add the Hare and then the other Eggtype-print3. Assembly the Eggs (size u want) with the nests4. Assembly the LED-Stripe with the Eggs and organize the Eggs and the Stripe. Use tape to fix the cable.5. Finish this part with the Outside_02-part (!!! Do not combine the nests with the arc!!!)6. Combine the whole build with the Base-part and fix it with the 6 Bolts. Therefor you need a tweezers and a screwdriver. Afterwards you should lock the bolts. To do this, turn it counterclockwise.7. Now you can place the nests. 8. Put the whole construct on the Soil/GroundFinish :-)