EasyThreed K10 Alternative Bed Base

I didn't like how the bed base was designed. the clearance from the front/rear of the rail was very small and it was bulky and too low in my humble opinion.
I wanted to raise it a little so the springs will be tighter and allow more tuning plus higher clearance from the front/rear caps of the rail.

Plus, it looks so much better now :)

No additional parts needed... but...
I upgraded the springs with these:
https://www.aliexpress.com/item/1005006917696064.html

I used the Yellow, 6x3x15mm, but you can try the Yellow, 6x3x10mm as well, because one of the springs is really compressed. (color coding is important - yellow for very small load - softer spring).