Eeyore

Eeyore, a character in the Winnie-the-Pooh books by A. A. Milne. He is generally characterized as a pessimistic, gloomy, depressed, old grey stuffed donkey who is a friend of the title character, Winnie-the-Pooh. No supports are required. One part is included with and without built-in supports. If you have the proper filament colors, no painting is needed. The assembled model is 115mm tall and is in proportion to my Winnie the Pooh model. Enjoy! ........................................................................................................... Print Instructions: Supports: No Resolution: .2mm Infill: 10% Notes:** Refer to the notes below for a few helpful printing and assembly instructions. ........................................................................................................... Building the model Colors Black: (Paramount3D PLA - Black) eye_blacks (contains two pieces) tail_black eyebrow_right eyebrow_left hair .. White: (Paramount3D PLA - White) eye_white_right eye_white_left .. Pink: (Paramount3D PLA - Harajuku Pink) ear_right ear_left mouth .. Red: (Hachbox PLA - True Red) bow_left bow_right .. Blue: (Paramount3D PLA - Cadet Blue) button Light Grey: (Paramount3D PLA - Prototype Gray) body_bottom face .. Dark Grey: (Paramount3D PLA - Battleship Gray) tail_grey body_top_with_supports body_top_no_supports (optional piece) .. Any color (hidden piece) bow_pin .. ........................................................................................................... Printing and assembly tips Printing tips 1-No supports are required. One part is included with and without built-in supports. body_top_with_supports contains supports for four areas of the body. Due to the shape of this part, some of the areas that need supports will still print a bit rough. To verify my supports, I also printed the part with PrusaSlicer supports to confirm that the roughness looks the same. The built-in supports are designed not only to provide support but to a