Slicer Discord
EI Multifunction Clock – 3D-Druckmodell von GrabCAD GrabCAD
SOLIDWORKS 2011

EI Multifunction Clock

1.5k Downloads
40 Likes
0 Makes
Zum Modell
Clock The ASC-5A is a fully functional, panel mounted aircraft clock. Choose between local time or Zulu Time, and between 12/24 formats. The Up Timers and Down Timers have programmable alarms that will alert you at custom intervals, which is perfect for checking waypoint status, remembering to switch tanks, or for any of the other tasks for which you need an intermittent reminder. Non-Volatile Memory With the ASC-5A installation, it is not necessary to keep the clock attached to battery power. Non-Volatile memory ensures the clock is always accurate, to the second, without having to keep the instrument constantly powered up. Altitude The ASC-5A is not only a world-class aviation clock, it is an altitude management system as well. The instrument displays both ATC Altitude (picked up in between the Encoder and Transponder), and Density Altitude. The Density Altitude is corrected for by barometric pressure (input by pilot) and an Outside Air Temperature probe, which comes standard with the ASC-5A. Pilots can program alarms that will alert when they've reached a programmed altitude. Then, a Deviation alarm will alert when the altitude deviates too far from the programmed Destination Altitude. These tools are perfect for reaching and maintaining ATC assigned altitudes, Minimum Decision Altitudes, or whatever cruise altitude you decide during a VFR flight. IFR Capable Because the clock is accurate to the second, the FAA considers the ASC-5A to meet the requirements for IFR flying.
Kategorie
SOLIDWORKS 2011
Quelle
GrabCAD
Veröffentlicht
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STEP, STL
Material
PLA
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen