Electric plug routing template

This jig is designed to cut out standard American electrical outlets, and as a cabinet maker, I use it to rout out the plug space. The cut-out measures 2-1/4" x 3-1/4". Here are some instructions for its usage:* The inch lines measure from the center of the plugs and can be adjusted in 1/8" increments.* The pins are standard 5mm cabinet shelf pins.* The centerlines are marked with curbs on the side and lines on the surface.* There are extra curbs on the edge that can be used to create multiple plugs when moving the jig.* There are four screw holes to secure the template. I reinforced mine with a washer in the center to ensure the screws do not pull through, but I have also added a build plate without the washers.* The insert is exchangeable in case it gets damaged by the router. Material list:4x M3x6mm bolt nuts4x M3x4x4.2 knurled nuts (heat inserts)4x 5mm shelf pins4 washers (mine measure 8.8mmx 0.9mm) but you can print it also without Hope this brings you fun to cut out e