Thingiverse
Electronics box + raspberry ender 3 pro
por Redemption_One
7
Descargas
6
Likes
0
Makes
ATTENTION: PRINT ONLY WITH WELL-CALIBRATED PRINTERS
Not being able to find a case to contain the electronics and the Raspberry, I decided to create one myself.
The parts you will need are M2.5x5 or m2.5x10 screws for the raspberry and m3 hot inserts for the rest of the parts as you can see from the images (I will add very soon) you can reuse the rest of the screws from the printer.
Optional: a 40x40x10 fan for the pi (I used a 5v one to connect directly to the gpio)
The box was built for a pi4 but I think the 3b fits in it without any problem.
The material is indifferent, I recommend from petg onwards only for a matter of convenience in the case of printing in an enclosure.
Not being able to find a case to contain the electronics and the Raspberry, I decided to create one myself.
The parts you will need are M2.5x5 or m2.5x10 screws for the raspberry and m3 hot inserts for the rest of the parts as you can see from the images (I will add very soon) you can reuse the rest of the screws from the printer.
Optional: a 40x40x10 fan for the pi (I used a 5v one to connect directly to the gpio)
The box was built for a pi4 but I think the 3b fits in it without any problem.
The material is indifferent, I recommend from petg onwards only for a matter of convenience in the case of printing in an enclosure.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!