Elephant Hueforge

Project: elephant.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Paramount 3D Mid Century Teal Transmission Distance: 2 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA PolyLite Pro Magenta Transmission Distance: 1 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA PolyLite White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Mid Century Teal At layer #13 (1.12mm) swap to Marine Blue At layer #15 (1.28mm) swap to Magenta At layer #16 (1.36mm) swap to Sunrise Orange At layer #18 (1.52mm) swap to White for the rest.