Elf Tree House

Elf Tree House Print with separate parts and colors. Assembly is simple, but adhesive is required. Refer to the main diagram for fitting. Due to material shrinkage and printing precision, apply some pressure when assembling. PLA, 0.2mm layer height, 2 wall layers, print small parts at 80mm/s. The model uses approximately 300g of filament and takes about 9 hours to print. Before printing, remember to clean the PEI build plate to ensure proper adhesion and keep the filament dry. ============================================================================= 精灵树屋 分件分色打印，拼装简单，需要用到胶水，看主图对着装，受材料收缩与打印精度影响，用点力压。 PLA，0.2层高，2层墙，小部件速度80。 模型用料300克，时长9小时。 打印前记得清洁好PEI打印板，保证其粘度OK，确保材料干燥