Thingiverse
Ender 5 Storage
di Maverick_3D
44
Download
13
Likes
0
Makes
This is a custom storage solution I designed after re-locating the control box on my Ender 5 to the rear. By moving the control box, I was able to free up space below the build plate. This design takes advantage of that space to store whatever you want.
The design I used to re-locate the control box is here: https://www.thingiverse.com/thing:3939592
In building this model, I aimed to minimize the amount of parts needed for assembly. Therefore, there are two files - one for the left and one for the right.
Once printed, clean up the holes and edges, then push the left and right pieces together where the floors overlap. Secure the middle seam using M3 and M4/M5 screws, and some type of bonding agent if you desire.
Once the two pieces are combined, utilize the screws (6) that previously secured the control box to affix the model in the empty space.
Recommendations and feedback are most welcome.
*** I am currently working on an iteration that reduces print time by us
The design I used to re-locate the control box is here: https://www.thingiverse.com/thing:3939592
In building this model, I aimed to minimize the amount of parts needed for assembly. Therefore, there are two files - one for the left and one for the right.
Once printed, clean up the holes and edges, then push the left and right pieces together where the floors overlap. Secure the middle seam using M3 and M4/M5 screws, and some type of bonding agent if you desire.
Once the two pieces are combined, utilize the screws (6) that previously secured the control box to affix the model in the empty space.
Recommendations and feedback are most welcome.
*** I am currently working on an iteration that reduces print time by us
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
