Thingiverse
Ender3 external electronics case
par c0nfu23d
11
Téléchargements
8
Likes
0
Makes
A custom case to house all Ender3 electronics separately from the printer.
There is space in the box for a shelf to hold a raspberry pi (coming soon)
The entire model is designed to be printed fairly easily in 2 prints. All models have one orientation that requires minimum supports and most walls are a multiple of 0.2
Also ease of assembly was a factor. The pieces fit together using tongue and groove joints which can be glued to make the model more sturdy.
Only 3 M2 5x6 screws are needed to secure the backplate. Alternatively you can ommit the backplate entirely and use the support material of the back hole which at 10-20% line infill should be stiff enough and the screw hole supports that will be embedded to the rest, are the perfect size to act as pins
There is space in the box for a shelf to hold a raspberry pi (coming soon)
The entire model is designed to be printed fairly easily in 2 prints. All models have one orientation that requires minimum supports and most walls are a multiple of 0.2
Also ease of assembly was a factor. The pieces fit together using tongue and groove joints which can be glued to make the model more sturdy.
Only 3 M2 5x6 screws are needed to secure the backplate. Alternatively you can ommit the backplate entirely and use the support material of the back hole which at 10-20% line infill should be stiff enough and the screw hole supports that will be embedded to the rest, are the perfect size to act as pins
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
