ESP32 Timer with Clock function

It's a Productivity timer which can be used as a clock if not in use.The open design makes building easier and also looks cool :DParts list:ESP32OLED sh1106 128x64Rotary EncoderWireAssembly:Here are the Pins that need to be connected you can use jumper wires or normal wire which needs to be soldered.There is also a spacer.stl file which can be used to lift the rotary encoder up a bit, mount it with a bit of super glue.For the encoder knob you can choose whatever you'd like.- Rotary Encoder: DT to Pin 18 CLK to Pin 19 SW to Pin 23 VCC to Pin 3v3 GND to Pin GND- OLED: VCC to Pin 3v3 GND to Pin GND SDA to Pin 21 SCL to Pin 22-ESP32:If you did everything correctly the ESP should be wired already.The correct order of assembly:1. Rotary Encoder2. ESP323. OLED DisplayCode:You can find the code on my Github make sure to add your own wifi and install all needed libarys.https://github.com/Plantinum980/ESP-TimerUsage:By double clicking you can switch between clock and timer mode. Rotate the encoder to navigate to your desired option to start/stop use a single click.