ESPSense - enclosure for ESP8266-based devboards

ESPSense - enclosure for ESP8266-based devboardsVersion 1c - for NodeMCU devkit (WeMos, Amica)This version fits development boards measuring around 49mm x 26mm. Mounting holes for board are spaced 44mm x 21mm.Does not fit Lolin style board! Sensor mounting holes are 10mm apart (~0,4"), so it should be possible to install a variety of sensor carriers. Tested ones:BMP180 (GY-68 carrier)SHT3x (Aliexpress carrier board)HDC1080 (Aliexpress rectangular carrier board with ~0,4" hole spacing)Should fit, but untested:Adafruit Stemma QT sensor boards with 0,8" hole spacingRequirements4x M3x5, D4 heat inserts for dev board (press from outside) M3x10 screws for above (countersunk ones work best due to proximity of buttons and antenna)3x M3x5, D4 heat inserts for sensors (press from inside)M3x10 - M3x15 screws for aboveoptionally 2x M3x5, D4 heat inserts for front cover lock (press from outside) and M3x25 countersunk screwsobviously, some thin cables to connect sensors to board, solderi