Evolution Door

These are three designs for an "Evolution Door," an artistic type of door based off the works of [Klemens Torggler.](http://www.torggler.co.at/)

The hinges on the flip doors are print-in-place, but everything else will require assembly with M3 screws and nuts.

Sliding Door BOM:
1x Sliding Door 1
1x Sliding Door 2
2x Link
1x Post
2x Washer Thick
Approx 5x Washer Thin (Or more)
6x M3 Nut
2x M3x12mm screw
3x M3x8mm screw
1x M3x5mm screw

Flipping Door BOM:
2x Flip Door 1 (or 2x Flip Door 2)
1x Post
2x Washer Thick
2x M3x15mm screw
1x M3x8mm screw

You may need slightly longer/shorter screws that what I've listed here or more/fewer thin washers to get a smooth motion.