ExtraTerrestrial V. HueForge

My own image. Then used HueForge v0.9.3 to create the model. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.I made two versions of the model size, the first is 200x200, the second for A1Mini 150x150mm. The color change settings are identical. You can also scale it but only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct. You may print at higher layer heights below the Min Depth of 0.64mm. The Max Depth is 2.48mm and the Actual Depth is 2.48mm. It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support.Filaments Used:PLA Elegoo Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA Elegoo + Gray Transmission Distance: 3PLA Elegoo + White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #10 (0.88mm) swap to Blue