Thingiverse
F5K SPINNER
par vfrunze
17
Téléchargements
13
Likes
0
Makes
25mm spinner for folding blades. Designed for copter motors with 5mm shaft 12mm long.
Fit 6x3 - 7x4 blades. Blades yoke 6mm wide. Blades shaft is 1.5mm, must be redrilled to 2mm. I've used 2mm bike spokes for shafts.
Make pause at 14mm height and insert M5 steel nut or print SPLIT version and glue parts together.
After assembling blade shafts must be secured with drop of CA.
Spinner tested with 6x3 blades at 11000 rpm.
Check prop balancing before use!
Fit 6x3 - 7x4 blades. Blades yoke 6mm wide. Blades shaft is 1.5mm, must be redrilled to 2mm. I've used 2mm bike spokes for shafts.
Make pause at 14mm height and insert M5 steel nut or print SPLIT version and glue parts together.
After assembling blade shafts must be secured with drop of CA.
Spinner tested with 6x3 blades at 11000 rpm.
Check prop balancing before use!
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !