Thingiverse
F5K SPINNER
di vfrunze
17
Download
13
Likes
0
Makes
25mm spinner for folding blades. Designed for copter motors with 5mm shaft 12mm long.
Fit 6x3 - 7x4 blades. Blades yoke 6mm wide. Blades shaft is 1.5mm, must be redrilled to 2mm. I've used 2mm bike spokes for shafts.
Make pause at 14mm height and insert M5 steel nut or print SPLIT version and glue parts together.
After assembling blade shafts must be secured with drop of CA.
Spinner tested with 6x3 blades at 11000 rpm.
Check prop balancing before use!
Fit 6x3 - 7x4 blades. Blades yoke 6mm wide. Blades shaft is 1.5mm, must be redrilled to 2mm. I've used 2mm bike spokes for shafts.
Make pause at 14mm height and insert M5 steel nut or print SPLIT version and glue parts together.
After assembling blade shafts must be secured with drop of CA.
Spinner tested with 6x3 blades at 11000 rpm.
Check prop balancing before use!
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!