FabDuino v1.1

One of the easiest DIY Arduinos in the world! Fabricated at Fablab77 in Moscow. Compatible with original Arduino Duemilanove. Needs Sparkfun FTDI Basic or FTDI Cable for programming. Features full SMD components for better soldering expirience. Current version - 1.1.

:UPD: Source files are designed in Eagle 6.4.

::UPD:: Partlist:
1x ATMega328 PDIP
1x LM1117-5.0
1x PDIP28 Socket
1x Breakaway SIP Connector
1x 5.0mm SMD Power Jack.
1x 6mm OMRON Button
2x SMD1206 LED (any color)
2x SMD1206 0.1uF Capacitor
1x SMD1206 10KOhm resistor
2x SMD1206 100Ohm resistor
3x SMD1206 0Ohm resitor (solder jumper)
1x 6pin SMD 0.1 pitch connector
2x SMD1206 22pF SMD Capacitor
1x 16Mhz HC49 Crystal

:::UPD::: I reccomend to buy Sparkfun Arduino ready version of ATMega328 so you do not need to flash bootloader by your own.